Stronghold Terrain prints these miniatures as an official licensee of Reconquer Designs.

Delivery Scope & Material:

• Highly detailed resin miniatures, unpainted and unassembled.
• We always strive to include the widest possible variety of different models in your package. However, in rare cases, there may be duplicate miniatures.
• The spears/lances include 1mm-diameter wire pins for enhanced stability, which fit perfectly into the riders’ hands. The accompanying spearheads (imagine them as sleeves) are then glued onto these wire pins.
• Bases not included.
• Handcrafted using 3D printing for maximum precision.
• Extremely high-quality, flexible resin—nearly indestructible.
• Prepared for you: Models are cleaned and UV post-cured by us, with most support structures already removed.
• Minimal effort, maximum impact: Light post-processing (e.g., removing residual supports) may be required.
• Easy fixes: Deformed parts (e.g., bent spears or bows) can be corrected with a 30-second hot water bath and gentle reshaping—this is not a defect, but typical for resin!

Important Safety Notes:

• Resin handling requires protection: Always wear gloves, safety goggles, and a mask—your safety comes first!
• Not suitable for children under 14 (small parts/liquid residue risk).
• Avoid prolonged sun exposure: Unprimed miniatures may harden further over time—a primer coat protects them.
• Assembly required: Miniatures are delivered unassembled. We recommend super glue (cyanoacrylate) for construction.

Tips for the Perfect Start:

• Prime your miniatures (e.g., with spray primer) to prevent yellowing and prepare for painting.
• Files/sandpaper help smooth out any remaining imperfections.
• Acrylic paints are ideal for painting—let your creativity run wild!

Stronghold Terrain prints these miniatures as an official licensee of Reconquer Designs.

Delivery Scope & Material:

• Highly detailed resin miniatures, unpainted and unassembled.
• We always strive to include the widest possible variety of different models in your package. However, in rare cases, there may be duplicate miniatures.
• The spears/lances include 1mm-diameter wire pins for enhanced stability, which fit perfectly into the riders’ hands. The accompanying spearheads (imagine them as sleeves) are then glued onto these wire pins.
• Bases not included.
• Handcrafted using 3D printing for maximum precision.
• Extremely high-quality, flexible resin—nearly indestructible.
• Prepared for you: Models are cleaned and UV post-cured by us, with most support structures already removed.
• Minimal effort, maximum impact: Light post-processing (e.g., removing residual supports) may be required.
• Easy fixes: Deformed parts (e.g., bent spears or bows) can be corrected with a 30-second hot water bath and gentle reshaping—this is not a defect, but typical for resin!

Important Safety Notes:

• Resin handling requires protection: Always wear gloves, safety goggles, and a mask—your safety comes first!
• Not suitable for children under 14 (small parts/liquid residue risk).
• Avoid prolonged sun exposure: Unprimed miniatures may harden further over time—a primer coat protects them.
• Assembly required: Miniatures are delivered unassembled. We recommend super glue (cyanoacrylate) for construction.

Tips for the Perfect Start:

• Prime your miniatures (e.g., with spray primer) to prevent yellowing and prepare for painting.
• Files/sandpaper help smooth out any remaining imperfections.
• Acrylic paints are ideal for painting—let your creativity run wild!

Made with 30mm proportions, but at a much taller height to represent his supposed historical height.

Stronghold Terrain prints these miniatures as an official licensee of Reconquer Designs.

Delivery Scope & Material:

• Highly detailed resin miniatures, unpainted and unassembled.
• We always strive to include the widest possible variety of different models in your package. However, in rare cases, there may be duplicate miniatures.
• The spears/lances include 1mm-diameter wire pins for enhanced stability, which fit perfectly into the riders’ hands. The accompanying spearheads (imagine them as sleeves) are then glued onto these wire pins.
• Bases not included.
• Handcrafted using 3D printing for maximum precision.
• Extremely high-quality, flexible resin—nearly indestructible.
• Prepared for you: Models are cleaned and UV post-cured by us, with most support structures already removed.
• Minimal effort, maximum impact: Light post-processing (e.g., removing residual supports) may be required.
• Easy fixes: Deformed parts (e.g., bent spears or bows) can be corrected with a 30-second hot water bath and gentle reshaping—this is not a defect, but typical for resin!

Important Safety Notes:

• Resin handling requires protection: Always wear gloves, safety goggles, and a mask—your safety comes first!
• Not suitable for children under 14 (small parts/liquid residue risk).
• Avoid prolonged sun exposure: Unprimed miniatures may harden further over time—a primer coat protects them.
• Assembly required: Miniatures are delivered unassembled. We recommend super glue (cyanoacrylate) for construction.

Tips for the Perfect Start:

• Prime your miniatures (e.g., with spray primer) to prevent yellowing and prepare for painting.
• Files/sandpaper help smooth out any remaining imperfections.
• Acrylic paints are ideal for painting—let your creativity run wild!

It comes with weapon options, allowing you to equip all 8 models with pikes, 4 with shorter polearms, or 6 with the infamous Goedags (Flemish). These models are perfect for representing Scottish pikemen or Flemish levies.

Stronghold Terrain prints these miniatures as an official licensee of Reconquer Designs.

Delivery Scope & Material:

• Highly detailed resin miniatures, unpainted and unassembled.
• We always strive to include the widest possible variety of different models in your package. However, in rare cases, there may be duplicate miniatures.
• The spears/lances include 1mm-diameter wire pins for enhanced stability, which fit perfectly into the riders’ hands. The accompanying spearheads (imagine them as sleeves) are then glued onto these wire pins.
• Bases not included.
• Handcrafted using 3D printing for maximum precision.
• Extremely high-quality, flexible resin—nearly indestructible.
• Prepared for you: Models are cleaned and UV post-cured by us, with most support structures already removed.
• Minimal effort, maximum impact: Light post-processing (e.g., removing residual supports) may be required.
• Easy fixes: Deformed parts (e.g., bent spears or bows) can be corrected with a 30-second hot water bath and gentle reshaping—this is not a defect, but typical for resin!

Important Safety Notes:

• Resin handling requires protection: Always wear gloves, safety goggles, and a mask—your safety comes first!
• Not suitable for children under 14 (small parts/liquid residue risk).
• Avoid prolonged sun exposure: Unprimed miniatures may harden further over time—a primer coat protects them.
• Assembly required: Miniatures are delivered unassembled. We recommend super glue (cyanoacrylate) for construction.

Tips for the Perfect Start:

• Prime your miniatures (e.g., with spray primer) to prevent yellowing and prepare for painting.
• Files/sandpaper help smooth out any remaining imperfections.
• Acrylic paints are ideal for painting—let your creativity run wild!

Perfect for SAGA Age of Chivalry, Age of Crusades or the King’s Tournament.

Stronghold Terrain prints these miniatures as an official licensee of Medbury Miniatures.

Delivery Scope & Material:

• Highly detailed resin miniatures, unpainted and unassembled.
• We always strive to include the widest possible variety of different models in your package. However, in rare cases, there may be duplicate miniatures.
• The spears/lances include 1mm-diameter wire pins for enhanced stability, which fit perfectly into the riders’ hands. The accompanying spearheads (imagine them as sleeves) are then glued onto these wire pins.
• Bases not included.
• Handcrafted using 3D printing for maximum precision.
• Extremely high-quality, flexible resin—nearly indestructible.
• Prepared for you: Models are cleaned and UV post-cured by us, with most support structures already removed.
• Minimal effort, maximum impact: Light post-processing (e.g., removing residual supports) may be required.
• Easy fixes: Deformed parts (e.g., bent spears or bows) can be corrected with a 30-second hot water bath and gentle reshaping—this is not a defect, but typical for resin!

Important Safety Notes:

• Resin handling requires protection: Always wear gloves, safety goggles, and a mask—your safety comes first!
• Not suitable for children under 14 (small parts/liquid residue risk).
• Avoid prolonged sun exposure: Unprimed miniatures may harden further over time—a primer coat protects them.
• Assembly required: Miniatures are delivered unassembled. We recommend super glue (cyanoacrylate) for construction.

Tips for the Perfect Start:

• Prime your miniatures (e.g., with spray primer) to prevent yellowing and prepare for painting.
• Files/sandpaper help smooth out any remaining imperfections.
• Acrylic paints are ideal for painting—let your creativity run wild!

Resin casting. , miniatures supplied unpainted and need some assembly

Scale: 28 mm

Resin casting. , miniatures supplied unpainted and need some assembly

Scale: 28 mm

Resin casting. , miniatures supplied unpainted and need some assembly

Scale: 28 mm

Resin casting. , miniatures supplied unpainted and need some assembly

Scale: 28 mm

Resin casting. , miniatures supplied unpainted and need some assembly

Scale: 28 mm