Perfect for SAGA Age of Invasions or Vikings.

Stronghold Terrain prints these miniatures as an official licensee of Medbury Miniatures.

Delivery Scope & Material:

• Highly detailed resin miniatures, unpainted and unassembled.
• We always strive to include the widest possible variety of different models in your package. However, in rare cases, there may be duplicate miniatures.
• The spears/lances include 1mm-diameter wire pins for enhanced stability, which fit perfectly into the riders’ hands. The accompanying spearheads (imagine them as sleeves) are then glued onto these wire pins.
• Bases not included.
• Handcrafted using 3D printing for maximum precision.
• Extremely high-quality, flexible resin—nearly indestructible.
• Prepared for you: Models are cleaned and UV post-cured by us, with most support structures already removed.
• Minimal effort, maximum impact: Light post-processing (e.g., removing residual supports) may be required.
• Easy fixes: Deformed parts (e.g., bent spears or bows) can be corrected with a 30-second hot water bath and gentle reshaping—this is not a defect, but typical for resin!

Important Safety Notes:

• Resin handling requires protection: Always wear gloves, safety goggles, and a mask—your safety comes first!
• Not suitable for children under 14 (small parts/liquid residue risk).
• Avoid prolonged sun exposure: Unprimed miniatures may harden further over time—a primer coat protects them.
• Assembly required: Miniatures are delivered unassembled. We recommend super glue (cyanoacrylate) for construction.

Tips for the Perfect Start:

• Prime your miniatures (e.g., with spray primer) to prevent yellowing and prepare for painting.
• Files/sandpaper help smooth out any remaining imperfections.
• Acrylic paints are ideal for painting—let your creativity run wild!

Perfect for SAGA Age of Invasions or Vikings.

One of the most dramatic episodes in the Old English epic Beowulf—and in the legendary history of the Geats (Götar) and Swedes (Svear)—is the death of King Ongentheow (also spelled Ongenþeow or Ongentheow). His death marks a pivotal moment in the feud between the Geats and the Swedes, a conflict that shapes the political landscape of Scandinavia in the poem. Here’s what happens:

The Context: Geats vs. Swedes

• Ongentheow is the king of the Swedes and a longstanding enemy of the Geats.
• Earlier in the poem, Ongentheow had killed Hæþcyn, the Geatish prince and brother of Hygelac (who later becomes king of the Geats). This act ignites a bitter feud between the two peoples.
• Hygelac, seeking revenge, leads a raid into Swedish territory. The Swedes counterattack, leading to a series of battles.

The Battle and Ongentheow’s Death

• In a decisive battle, Ongentheow is cornered by the Geats. The poem describes how he fights fiercely but is ultimately overwhelmed.
• Eofor, a Geatish warrior, delivers the fatal blow to Ongentheow, killing him and avenging Hæþcyn’s death.
• The victory solidifies Hygelac’s reputation as a powerful king and temporarily weakens the Swedes.

Stronghold Terrain prints these miniatures as an official licensee of Medbury Miniatures.

Delivery Scope & Material:

• Highly detailed resin miniatures, unpainted and unassembled.
• We always strive to include the widest possible variety of different models in your package. However, in rare cases, there may be duplicate miniatures.
• The spears/lances include 1mm-diameter wire pins for enhanced stability, which fit perfectly into the riders’ hands. The accompanying spearheads (imagine them as sleeves) are then glued onto these wire pins.
• Bases not included.
• Handcrafted using 3D printing for maximum precision.
• Extremely high-quality, flexible resin—nearly indestructible.
• Prepared for you: Models are cleaned and UV post-cured by us, with most support structures already removed.
• Minimal effort, maximum impact: Light post-processing (e.g., removing residual supports) may be required.
• Easy fixes: Deformed parts (e.g., bent spears or bows) can be corrected with a 30-second hot water bath and gentle reshaping—this is not a defect, but typical for resin!

Important Safety Notes:

• Resin handling requires protection: Always wear gloves, safety goggles, and a mask—your safety comes first!
• Not suitable for children under 14 (small parts/liquid residue risk).
• Avoid prolonged sun exposure: Unprimed miniatures may harden further over time—a primer coat protects them.
• Assembly required: Miniatures are delivered unassembled. We recommend super glue (cyanoacrylate) for construction.

Tips for the Perfect Start:

• Prime your miniatures (e.g., with spray primer) to prevent yellowing and prepare for painting.
• Files/sandpaper help smooth out any remaining imperfections.
• Acrylic paints are ideal for painting—let your creativity run wild!

Perfect for SAGA Age of Invasions or Vikings.

Stronghold Terrain prints these miniatures as an official licensee of Medbury Miniatures.

Delivery Scope & Material:

• Highly detailed resin miniatures, unpainted and unassembled.
• We always strive to include the widest possible variety of different models in your package. However, in rare cases, there may be duplicate miniatures.
• The spears/lances include 1mm-diameter wire pins for enhanced stability, which fit perfectly into the riders’ hands. The accompanying spearheads (imagine them as sleeves) are then glued onto these wire pins.
• Bases not included.
• Handcrafted using 3D printing for maximum precision.
• Extremely high-quality, flexible resin—nearly indestructible.
• Prepared for you: Models are cleaned and UV post-cured by us, with most support structures already removed.
• Minimal effort, maximum impact: Light post-processing (e.g., removing residual supports) may be required.
• Easy fixes: Deformed parts (e.g., bent spears or bows) can be corrected with a 30-second hot water bath and gentle reshaping—this is not a defect, but typical for resin!

Important Safety Notes:

• Resin handling requires protection: Always wear gloves, safety goggles, and a mask—your safety comes first!
• Not suitable for children under 14 (small parts/liquid residue risk).
• Avoid prolonged sun exposure: Unprimed miniatures may harden further over time—a primer coat protects them.
• Assembly required: Miniatures are delivered unassembled. We recommend super glue (cyanoacrylate) for construction.

Tips for the Perfect Start:

• Prime your miniatures (e.g., with spray primer) to prevent yellowing and prepare for painting.
• Files/sandpaper help smooth out any remaining imperfections.
• Acrylic paints are ideal for painting—let your creativity run wild!

Perfect for SAGA Age of Invasions or Vikings.

Stronghold Terrain prints these miniatures as an official licensee of Medbury Miniatures.

Delivery Scope & Material:

• Highly detailed resin miniatures, unpainted and unassembled.
• We always strive to include the widest possible variety of different models in your package. However, in rare cases, there may be duplicate miniatures.
• The spears/lances include 1mm-diameter wire pins for enhanced stability, which fit perfectly into the riders’ hands. The accompanying spearheads (imagine them as sleeves) are then glued onto these wire pins.
• Bases not included.
• Handcrafted using 3D printing for maximum precision.
• Extremely high-quality, flexible resin—nearly indestructible.
• Prepared for you: Models are cleaned and UV post-cured by us, with most support structures already removed.
• Minimal effort, maximum impact: Light post-processing (e.g., removing residual supports) may be required.
• Easy fixes: Deformed parts (e.g., bent spears or bows) can be corrected with a 30-second hot water bath and gentle reshaping—this is not a defect, but typical for resin!

Important Safety Notes:

• Resin handling requires protection: Always wear gloves, safety goggles, and a mask—your safety comes first!
• Not suitable for children under 14 (small parts/liquid residue risk).
• Avoid prolonged sun exposure: Unprimed miniatures may harden further over time—a primer coat protects them.
• Assembly required: Miniatures are delivered unassembled. We recommend super glue (cyanoacrylate) for construction.

Tips for the Perfect Start:

• Prime your miniatures (e.g., with spray primer) to prevent yellowing and prepare for painting.
• Files/sandpaper help smooth out any remaining imperfections.
• Acrylic paints are ideal for painting—let your creativity run wild!

Perfect for SAGA Age of Invasions or Vikings.

Hengest: The Legendary Leader of the Anglo-Saxon Settlement in Britain

Hengest is one of the most prominent figures in early Anglo-Saxon history, traditionally regarded as the leader of the first Germanic settlers who arrived in Britain in the 5th century. Alongside his brother Horsa, Hengest is credited with establishing the foundations of the Anglo-Saxon kingdoms, particularly in Kent. Here’s what we know about him:

Historical Context

• Hengest and Horsa are first mentioned in Bede’s Ecclesiastical History of the English People (731 AD) as leaders of the Jutes, Angles, and Saxons who were invited by the British king Vortigern to help defend against Pictish and Scottish raids.
• According to the Anglo-Saxon Chronicle (9th century), Hengest and Horsa landed in Ebbsfleet, Kent, in 449 AD. They initially served as mercenaries but later rebelled against Vortigern, leading to the establishment of Germanic rule in parts of Britain.

Stronghold Terrain prints these miniatures as an official licensee of Medbury Miniatures.

Delivery Scope & Material:

• Highly detailed resin miniatures, unpainted and unassembled.
• We always strive to include the widest possible variety of different models in your package. However, in rare cases, there may be duplicate miniatures.
• The spears/lances include 1mm-diameter wire pins for enhanced stability, which fit perfectly into the riders’ hands. The accompanying spearheads (imagine them as sleeves) are then glued onto these wire pins.
• Bases not included.
• Handcrafted using 3D printing for maximum precision.
• Extremely high-quality, flexible resin—nearly indestructible.
• Prepared for you: Models are cleaned and UV post-cured by us, with most support structures already removed.
• Minimal effort, maximum impact: Light post-processing (e.g., removing residual supports) may be required.
• Easy fixes: Deformed parts (e.g., bent spears or bows) can be corrected with a 30-second hot water bath and gentle reshaping—this is not a defect, but typical for resin!

Important Safety Notes:

• Resin handling requires protection: Always wear gloves, safety goggles, and a mask—your safety comes first!
• Not suitable for children under 14 (small parts/liquid residue risk).
• Avoid prolonged sun exposure: Unprimed miniatures may harden further over time—a primer coat protects them.
• Assembly required: Miniatures are delivered unassembled. We recommend super glue (cyanoacrylate) for construction.

Tips for the Perfect Start:

• Prime your miniatures (e.g., with spray primer) to prevent yellowing and prepare for painting.
• Files/sandpaper help smooth out any remaining imperfections.
• Acrylic paints are ideal for painting—let your creativity run wild!

Perfect for SAGA Age of Invasions or Vikings.

Horsa: The Legendary Figure of Early Anglo-Saxon England

Horsa is a semi-legendary figure in early Anglo-Saxon history, often mentioned alongside his brother Hengist as one of the leaders of the first Germanic settlers (Jutes, Angles, and Saxons) who arrived in Britain in the 5th century. Here are the key points about Horsa:

Historical Sources

• Bede the Venerable (672–735 AD) mentions in his Ecclesiastical History of the English People (Historia ecclesiastica gentis Anglorum) that Hengist and Horsa were invited by the British king Vortigern to help defend against the Picts.
• The Anglo-Saxon Chronicle (9th century) records that Hengist and Horsa landed in Ebbsfleet (Kent) in 449 AD and later fought against the Britons. Horsa was killed in the Battle of Aylesford (Kent) in 455 AD.

Stronghold Terrain prints these miniatures as an official licensee of Medbury Miniatures.

Delivery Scope & Material:

• Highly detailed resin miniatures, unpainted and unassembled.
• We always strive to include the widest possible variety of different models in your package. However, in rare cases, there may be duplicate miniatures.
• The spears/lances include 1mm-diameter wire pins for enhanced stability, which fit perfectly into the riders’ hands. The accompanying spearheads (imagine them as sleeves) are then glued onto these wire pins.
• Bases not included.
• Handcrafted using 3D printing for maximum precision.
• Extremely high-quality, flexible resin—nearly indestructible.
• Prepared for you: Models are cleaned and UV post-cured by us, with most support structures already removed.
• Minimal effort, maximum impact: Light post-processing (e.g., removing residual supports) may be required.
• Easy fixes: Deformed parts (e.g., bent spears or bows) can be corrected with a 30-second hot water bath and gentle reshaping—this is not a defect, but typical for resin!

Important Safety Notes:

• Resin handling requires protection: Always wear gloves, safety goggles, and a mask—your safety comes first!
• Not suitable for children under 14 (small parts/liquid residue risk).
• Avoid prolonged sun exposure: Unprimed miniatures may harden further over time—a primer coat protects them.
• Assembly required: Miniatures are delivered unassembled. We recommend super glue (cyanoacrylate) for construction.

Tips for the Perfect Start:

• Prime your miniatures (e.g., with spray primer) to prevent yellowing and prepare for painting.
• Files/sandpaper help smooth out any remaining imperfections.
• Acrylic paints are ideal for painting—let your creativity run wild!

Perfect for SAGA Age of Invasions or Vikings.

Wiglaf in the Vendel Period

Historical Context: Wiglaf is mentioned in some sources as a leader or king of the Geats (Götar) in Sweden. The Vendel Period (c. 550–800 AD) was a transitional phase between the Germanic Iron Age and the Viking Age, marked by power struggles, trade, and the emergence of centralized political structures.

Beowulf Epic: In the Old English poem Beowulf (composed between the 8th and 11th centuries), Wiglaf is portrayed as a loyal retainer and nephew of the hero Beowulf. He aids Beowulf in the battle against the dragon and succeeds him as king of the Geats after his death. While it is unclear whether this Wiglaf is the same as the historical figure, the poem reflects the cultural and social structures of the Vendel Period.

Archaeological Finds: The Vendel Period is renowned for its rich burial sites, such as those in Vendel and Valsgärde in Sweden. These finds reveal a society with a strong social hierarchy, where warrior elites played a central role. The elaborate grave goods, including helmets, shields, and weapons, highlight the martial culture and status of the ruling class during this era.

Stronghold Terrain prints these miniatures as an official licensee of Medbury Miniatures.

Delivery Scope & Material:

• Highly detailed resin miniatures, unpainted and unassembled.
• We always strive to include the widest possible variety of different models in your package. However, in rare cases, there may be duplicate miniatures.
• The spears/lances include 1mm-diameter wire pins for enhanced stability, which fit perfectly into the riders’ hands. The accompanying spearheads (imagine them as sleeves) are then glued onto these wire pins.
• Bases not included.
• Handcrafted using 3D printing for maximum precision.
• Extremely high-quality, flexible resin—nearly indestructible.
• Prepared for you: Models are cleaned and UV post-cured by us, with most support structures already removed.
• Minimal effort, maximum impact: Light post-processing (e.g., removing residual supports) may be required.
• Easy fixes: Deformed parts (e.g., bent spears or bows) can be corrected with a 30-second hot water bath and gentle reshaping—this is not a defect, but typical for resin!

Important Safety Notes:

• Resin handling requires protection: Always wear gloves, safety goggles, and a mask—your safety comes first!
• Not suitable for children under 14 (small parts/liquid residue risk).
• Avoid prolonged sun exposure: Unprimed miniatures may harden further over time—a primer coat protects them.
• Assembly required: Miniatures are delivered unassembled. We recommend super glue (cyanoacrylate) for construction.

Tips for the Perfect Start:

• Prime your miniatures (e.g., with spray primer) to prevent yellowing and prepare for painting.
• Files/sandpaper help smooth out any remaining imperfections.
• Acrylic paints are ideal for painting—let your creativity run wild!

Perfect for SAGA Age of Invasions or Vikings.

Stronghold Terrain prints these miniatures as an official licensee of Medbury Miniatures.

Delivery Scope & Material:

• Highly detailed resin miniatures, unpainted and unassembled.
• We always strive to include the widest possible variety of different models in your package. However, in rare cases, there may be duplicate miniatures.
• The spears/lances include 1mm-diameter wire pins for enhanced stability, which fit perfectly into the riders’ hands. The accompanying spearheads (imagine them as sleeves) are then glued onto these wire pins.
• Bases not included.
• Handcrafted using 3D printing for maximum precision.
• Extremely high-quality, flexible resin—nearly indestructible.
• Prepared for you: Models are cleaned and UV post-cured by us, with most support structures already removed.
• Minimal effort, maximum impact: Light post-processing (e.g., removing residual supports) may be required.
• Easy fixes: Deformed parts (e.g., bent spears or bows) can be corrected with a 30-second hot water bath and gentle reshaping—this is not a defect, but typical for resin!

Important Safety Notes:

• Resin handling requires protection: Always wear gloves, safety goggles, and a mask—your safety comes first!
• Not suitable for children under 14 (small parts/liquid residue risk).
• Avoid prolonged sun exposure: Unprimed miniatures may harden further over time—a primer coat protects them.
• Assembly required: Miniatures are delivered unassembled. We recommend super glue (cyanoacrylate) for construction.

Tips for the Perfect Start:

• Prime your miniatures (e.g., with spray primer) to prevent yellowing and prepare for painting.
• Files/sandpaper help smooth out any remaining imperfections.
• Acrylic paints are ideal for painting—let your creativity run wild!

Perfect for SAGA Age of Invasions or Vikings.

Stronghold Terrain prints these miniatures as an official licensee of Medbury Miniatures.

Delivery Scope & Material:

• Highly detailed resin miniatures, unpainted and unassembled.
• We always strive to include the widest possible variety of different models in your package. However, in rare cases, there may be duplicate miniatures.
• The spears/lances include 1mm-diameter wire pins for enhanced stability, which fit perfectly into the riders’ hands. The accompanying spearheads (imagine them as sleeves) are then glued onto these wire pins.
• Bases not included.
• Handcrafted using 3D printing for maximum precision.
• Extremely high-quality, flexible resin—nearly indestructible.
• Prepared for you: Models are cleaned and UV post-cured by us, with most support structures already removed.
• Minimal effort, maximum impact: Light post-processing (e.g., removing residual supports) may be required.
• Easy fixes: Deformed parts (e.g., bent spears or bows) can be corrected with a 30-second hot water bath and gentle reshaping—this is not a defect, but typical for resin!

Important Safety Notes:

• Resin handling requires protection: Always wear gloves, safety goggles, and a mask—your safety comes first!
• Not suitable for children under 14 (small parts/liquid residue risk).
• Avoid prolonged sun exposure: Unprimed miniatures may harden further over time—a primer coat protects them.
• Assembly required: Miniatures are delivered unassembled. We recommend super glue (cyanoacrylate) for construction.

Tips for the Perfect Start:

• Prime your miniatures (e.g., with spray primer) to prevent yellowing and prepare for painting.
• Files/sandpaper help smooth out any remaining imperfections.
• Acrylic paints are ideal for painting—let your creativity run wild!

Perfect for SAGA Age of Invasions or Vikings.

Stronghold Terrain prints these miniatures as an official licensee of Medbury Miniatures.

Delivery Scope & Material:

• Highly detailed resin miniatures, unpainted and unassembled.
• We always strive to include the widest possible variety of different models in your package. However, in rare cases, there may be duplicate miniatures.
• The spears/lances include 1mm-diameter wire pins for enhanced stability, which fit perfectly into the riders’ hands. The accompanying spearheads (imagine them as sleeves) are then glued onto these wire pins.
• Bases not included.
• Handcrafted using 3D printing for maximum precision.
• Extremely high-quality, flexible resin—nearly indestructible.
• Prepared for you: Models are cleaned and UV post-cured by us, with most support structures already removed.
• Minimal effort, maximum impact: Light post-processing (e.g., removing residual supports) may be required.
• Easy fixes: Deformed parts (e.g., bent spears or bows) can be corrected with a 30-second hot water bath and gentle reshaping—this is not a defect, but typical for resin!

Important Safety Notes:

• Resin handling requires protection: Always wear gloves, safety goggles, and a mask—your safety comes first!
• Not suitable for children under 14 (small parts/liquid residue risk).
• Avoid prolonged sun exposure: Unprimed miniatures may harden further over time—a primer coat protects them.
• Assembly required: Miniatures are delivered unassembled. We recommend super glue (cyanoacrylate) for construction.

Tips for the Perfect Start:

• Prime your miniatures (e.g., with spray primer) to prevent yellowing and prepare for painting.
• Files/sandpaper help smooth out any remaining imperfections.
• Acrylic paints are ideal for painting—let your creativity run wild!